Periodic Maintenance of Brake Disc

Indeed when the brake motor does not have a problem then we will surely feel more calm. We are so free to do their daily activities or touring with colleagues. But what if the vehicle braking system that will be used have problems. We recommend that you do not force your wishes because it would only create problems later on.

In order for components of the brake can not work up to the regular maintenance is very important to do. Usually for periodic checks on the braking system that uses the disk is 6 months. These periodic checks are not too complicated, can be done alone at home.


To check the braking system that uses disks, devices that need to be prepared is a screwdriver min (-), a key measure of L 5, wrenches and a wire brush.

The first thing to do is undo two bolts on KALIPER by using a screwdriver min (-). Because under these bolts are bolts L that serves as a sliding bolt to canvass the brakes. Then release the disc with kaliper from open bolt with a spanner.

After KALIPER apart from the disc, then off the brake bracket as well. If dry bracket, could be oil. When it was done then you should check the piston from KALIPER. If there is dust on the piston you should clean up by using a wire brush. After clean the grease to Squirt facilitate movement of the piston. But keep in mind when it's done, then check the piston by simply pressing the piston. If you still can not work it means there is no problem. But when using the power of the hand is hard work then there are problems in KALIPER.

If the brakes have worn canvass immediately replace it with a new one to be more secure। Do not forget to check the brake oil contained in the master brake, when it reduced add the oil brake according to the two-wheeled vehicles.